Overblog Suivre ce blog
Editer la page Administration Créer mon blog
/ / /

 

ORACLE ERROR LIST

 

ORA-13221 ORA-13221: unknown geometry type in the geometry object
Cause  The SDO_GTYPE attribute in the geometry object contains an invalid value
Action  Redefine the geometric type in the geometry table using one of the supported SDO_GTYPE values. See the Oracle Spatial documentation for an explanation of SDO_GTYPE and its possible values.

 

ORA-13222 ORA-13222: failed to compute supercell for geometry in string
Cause  The system was unable to compute the minimum bounding tile or supercell for a geometry in the specified table.
Action  Another error might accompany this error. Correct the accompanying error. Also, validate the geometry for correctness.

 

ORA-13223 ORA-13223: duplicate entry for string in SDO_GEOM_METADATA
Cause  There are duplicate entries for the given table and column value pair in the USER_SDO_GEOM_METADATA view.
Action  Check that the specified table and geometry column names are correct. There should be only one entry per table, geometry column pair in the USER_SDO_GEOM_METADATA view.

 

ORA-13224 ORA-13224: zero tolerance specified for layer in USER_SDO_GEOM_METADATA
Cause  A tolerance of zero or NULL is supplied for a layer in USER_SDO_GEOM_METADATA view.
Action  Check the tolerance specified to make sure it is a positive value.

 

ORA-13225 ORA-13225: specified index table name is too long for a spatial index
Cause  An index table name is specified which is longer than the supported length of the spatial index table name.
Action  Check the supported size of the index table name and reduce the size of the index name.

 

ORA-13226 ORA-13226: interface not supported without a spatial index
Cause  The geometry table does not have a spatial index.
Action  Verify that the geometry table referenced in the spatial operator has a spatial index on it.

 

ORA-13227 ORA-13227: SDO_LEVEL values for the two index tables do not match
Cause  The SDO_LEVEL values for the two index tables used in the spatial join operator do not match.
Action  Verify that two compatible indexes are used for the spatial join operator. Quadtree indexes are compatible if they have the same SDO_LEVEL and SDO_NUMTILES values

 

ORA-13228 ORA-13228: spatial index create failed due to invalid type
Cause  An Attempt was made to create a spatial index on a column of type other than SDO_GEOMETRY.
Action  Make sure that the index is created on a column of type SDO_GEOMETRY.

 

ORA-13230 ORA-13230: failed to create temporary table [string] during R-tree creation
Cause  The specified temporary table either already exists or there is not enough tablespace.
Action  Delete the table if it already exists and verify if the current user has CREATE TABLE privileges and has sufficient space in the default or specified tablespace.

 

ORA-13231 ORA-13231: failed to create index table [string] during R-tree creation
Cause  The specified index table either already exists or there is not enough tablespace.
Action  Delete the table if it already exists and verify if the current user has CREATE TABLE privileges and has sufficient space in the default or specified tablespace. If that fails to correct the problem, contact Oracle Support Services.

 

ORA-13232 ORA-13232: failed to allocate memory during R-tree creation
Cause  This feature assumes a minimum of 64K memory for bulk creation.
Action  Create the index for a small subset of the data. Then, use transactional insert operations for the rest of the data.

 

ORA-13233 ORA-13233: failed to create sequence number [string] for R-tree
Cause  The specified sequence number exists.
Action  Delete the sequence object, or contact Oracle Support Services.

 

ORA-13234 ORA-13234: failed to access R-tree-index table [string]
Cause  The index table is either deleted or corrupted.
Action  Rebuild the index or contact Oracle Support Services with accompanying error messages.

 

ORA-13236 ORA-13236: internal error in R-tree processing: [string]
Cause  An internal error occurred in R-tree processing.
Action  Contact Oracle Support Services with the message text.

 

ORA-13237 ORA-13237: internal error during R-tree concurrent updates: [string]
Cause  An inconsistency is encountered during concurrent updates, possibly due to the use of serializable isolation level.
Action  Change the isolation level to "read committed" using the ALTER SESSION statement, or contact Oracle Support Services with the message text.

 

ORA-13239 ORA-13239: sdo_dimensionality not specified during n-d R-tree creation
Cause  An error occurred in reading the dimensionality parameter
Action  Check the documentation for a valid range, and specify the dimensionality as a parameter.

 

ORA-13240 ORA-13240: specified dimensionality greater than that of the query mbr
Cause  An error occurred because of too few values in the query minimum bounding rectangle (MBR).
Action  Omit the dimensionality, or use the dimensionality of the query.

 

ORA-13241 ORA-13241: specified dimensionality does not match that of the data
Cause  An error occurred because the dimensionality specified in the CREATE INDEX statement does not match that of the data.
Action  Change the statement to reflect the data dimensionality.

 

ORA-13243 ORA-13243: specified operator is not supported for 3- or higher-dimensional R-tree
Cause  Currently, an R-tree index with three or more index dimensions can be used only with the SDO_FILTER operator.
Action  Use the SDO_FILTER operator, and check the documentation for the querytype parameter for SDO_FILTER; or contact Oracle Support Services.

 

ORA-13249 ORA-13249: %s
Cause  An internal error was encountered in the extensible spatial index component. The text of the message is obtained from some other server component.
Action  Contact Oracle Support Services with the exact error text.

 

ORA-13250 ORA-13250: insufficient privileges to modify metadata table entries
Cause  The user requesting the operation does not have the appropriate privileges on the referenced tables.
Action  Check that the specified feature and geometry table names are correct, and then verify that the current user has at least SELECT privilege on those tables.

 

ORA-13251 ORA-13251: duplicate entry string in metadata table
Cause  The specified entry already exists in the metadata table.
Action  Check that the specified feature and geometry table names are correct. A feature-geometry table association should be registered only once.

 

ORA-13260 ORA-13260: layer table string does not exist
Cause  Data migration source table _SDOGEOM does not exist.
Action  Ensure that the specified layer name is correct and that the corresponding spatial layer tables exist in the current schema.

 

ORA-13261 ORA-13261: geometry table string does not exist
Cause  The specified geometry table does not exist in the current schema.
Action  Create a table containing a column of type SDO_GEOMETRY and a column of type NUMBER for the GID values.

 

ORA-13262 ORA-13262: geometry column string does not exist in table string
Cause  The specified table does not have a column of type SDO_GEOMETRY.
Action  Alter or re-create the table such that it includes a column of type SDO_GEOMETRY and a column of type NUMBER.

 

ORA-13263 ORA-13263: column string in table string is not of type SDO_GEOMETRY
Cause  The column intended for storing the geometry is not of type SDO_GEOMETRY.
Action  Alter the column definition to be of type SDO_GEOMETRY.

 

ORA-13264 ORA-13264: geometry identifier column string does not exist in table string
Cause  The specified table does not contain a GID column.
Action  Confirm that the GID column name was correctly specified and that it exists in the specified table.

 

ORA-13265 ORA-13265: geometry identifier column string in table string is not of type NUMBER
Cause  GID column is not of type NUMBER.
Action  Alter the table definition such that the column containing the geometry identifier (GID) is of type NUMBER.

 

ORA-13266 ORA-13266: error inserting data into table string
Cause  An OCI error occurred, or the user has insufficient quota in the active tablespace, or the rollback segments are too small.
Action  There should be an accompanying error message that indicates the cause of the problem. Take appropriate action to correct the indicated problem.

 

ORA-13267 ORA-13267: error reading data from layer table string
Cause  There was an error reading the geometry data from the _SDOGEOM table.
Action  Verify that _SDOGEOM and _SDODIM exist. If they do exist, run VALIDATE_LAYER_WITH_CONTEXT on the specified layer.

 

ORA-13268 ORA-13268: error obtaining dimension from USER_SDO_GEOM_METADATA
Cause  There is no entry in the USER_SDO_GEOM_METADATA view for the specified geometry table.
Action  Insert an entry for the destination geometry table with the correct dimension information.

 

ORA-13269 ORA-13269: internal error [string] encountered when processing geometry table
Cause  An internal error occurred.
Action  Contact Oracle Support Services with the exact error message text.

 

ORA-13270 ORA-13270: OCI error string
Cause  An OCI error occurred while processing the layer or geometry tables.
Action  Take the appropriate steps to correct the OCI-specific error.

 

ORA-13271 ORA-13271: error allocating memory for geometry object
Cause  Insufficient memory.
Action  Make more memory available to the current session/process.

 

ORA-13272 ORA-13272: geometric object string in table string is invalid
Cause  The specified object failed the geometric integrity checks performed by the validation function.
Action  Check the Oracle Spatial documentation for information about the geometric integrity checks performed by VALIDATE_GEOMETRY_WITH_CONTEXT and correct the geometry definition if required.

 

ORA-13273 ORA-13273: dimension metadata table string does not exist
Cause  The _SDODIM table does not exist.
Action  Verify that the specified layer name is correct and that the _SDODIM table exists in the current schema.

 

ORA-13274 ORA-13274: operator invoked with non-compatible SRIDs
Cause  A Spatial operator was invoked with a window geometry with an SRID but the layer has no SRID; or the window has no SRID but the layer has an SRID.
Action  Make sure that the layer and window both have an SRID or that they both do not have an SRID.

 

ORA-13275 ORA-13275: spatial index creation failure on unsupported type
Cause  An attempt was made to create a spatial index create on a column that is not of type SDO_GEOMETRY.
Action  A spatial index can only be created on a column of type SDO_GEOMETRY. Make sure the indexed column is of type SDO_GEOMETRY.

 

ORA-13276 ORA-13276: internal error [string] in coordinate transformation
Cause  OCI internal error.
Action  Contact Oracle Support Services with the exact error message text.

 

ORA-13278 ORA-13278: failure to convert SRID to native format
Cause  OCI internal error.
Action  Contact Oracle Support Services with the exact error message text.

 

ORA-13281 ORA-13281: failure in execution of SQL statement to retrieve WKT
Cause  OCI internal error, or SRID does not match a table entry.
Action  Check that a valid SRID is being used.

 

ORA-13282 ORA-13282: failure on initialization of coordinate transformation
Cause  Parsing error on source or destination coordinate system WKT, or incompatible coordinate systems.
Action  Check the validity of the WKT for table entries, and check if the requested transformation is valid.

 

ORA-13283 ORA-13283: failure to get new geometry object for conversion in place
Cause  OCI internal error.
Action  Contact Oracle Support Services with the exact error message text.

 

ORA-13284 ORA-13284: failure to copy geometry object for conversion in place
Cause  OCI internal error.
Action  Contact Oracle Support Services with the exact error message text.

 

ORA-13285 ORA-13285: Geometry coordinate transformation error
Cause  A coordinate pair was out of valid range for a conversion/projection.
Action  Check that data to be transformed is consistent with the desired conversion/projection.

 

ORA-13287 ORA-13287: can"t transform unknown gtype
Cause  A geometry with a gtype of <= 0 was specified for transformation. Only a gtype >= 1 is allowed.
Action  Check the Oracle Spatial documentation for SDO_GTYPE values, and specify a value whose last digit is 1 or higher.

 

ORA-13288 ORA-13288: point coordinate transformation error
Cause  An internal error occurred while transforming points.
Action  Check the accompanying error messages.

 

ORA-13290 ORA-13290: the specified unit is not supported
Cause  An Oracle Spatial function was called with an unknown UNIT value.
Action  Check Spatial documentation for the supported units, and call the function with the correct UNIT parameter.

 

ORA-13291 ORA-13291: conversion error between the specified unit and standard unit
Cause  Cannot convert the specified unit from/to standard unit for linear distance, angle, or area.
Action  Check the unit specification and respecify it.

 

ORA-13292 ORA-13292: incorrect ARC_TOLERANCE specification
Cause  When a SDO_BUFFER or SDO_AGGR_BUFFER function is called on a geodetic geometry, or SDO_ARC_DENSIFY is called, ARC_TOLERANCE must be specified, and it should not be less than the tolerance specified for the geometry.
Action  Check ARC_TOLERANCE specification and make sure it is correct.

 

ORA-13293 ORA-13293: cannot specify unit for geometry without a georeferenced SRID
Cause  An Oracle Spatial function with a UNIT parameter was called on a geometry without a georeferenced SRID.
Action  Make sure that spatial functions with UNIT parameters are only called on geometries with georeferenced SRIDs.

 

ORA-13294 ORA-13294: cannot transform geometry containing circular arcs
Cause  It is impossible to transform a 3-point representation of a circular arc without distortion.
Action  Make sure a geometry does not contain circular arcs.

 

ORA-13295 ORA-13295: geometry objects are in different coordinate systems
Cause  An Oracle Spatial function was called with two geometries that have different SRIDs.
Action  Transform geometry objects to be in the same coordinate system and call the spatial function.

 

ORA-13296 ORA-13296: incorrect coordinate system specification
Cause  Wrong numbers in WKT for Earth radius or flattening for the current SRID.
Action  Check WKT in the MDSYS.CS_SRS table for Earth radius and inverse flattening.

 

ORA-13300 ORA-13300: single point transform error
Cause  Low-level coordinate transformation error trap.
Action  Check the accompanying error messages.

 

ORA-13303 ORA-13303: failure to retrieve a geometry object from a table
Cause  OCI internal error.
Action  Contact Oracle Support Services with the exact error message text.

 

ORA-13304 ORA-13304: failure to insert a transformed geometry object in a table
Cause  OCI internal error.
Action  Contact Oracle Support Services with the exact error message text.

 

ORA-13330 ORA-13330: invalid MASK
Cause  The MASK passed to the RELATE function is not valid.
Action  Verify that the mask is not NULL. See the Oracle Spatial documentation for a list of supported masks.

 

ORA-13331 ORA-13331: invalid LRS segment
Cause  The given LRS segment was not a valid line string.
Action  A valid LRS geometric segment is a line string geometry in Oracle Spatial. It could be a simple or compound line string (made of lines or arcs, or both). The dimension information must include the measure dimension as the last element in the Oracle Spatial metadata. Currently, the number of dimensions for an LRS segment must be greater than 2 (x/y or longitude/latitude, plus measure)

 

ORA-13332 ORA-13332: invalid LRS point
Cause  The specified LRS point was not a point geometry with measure information.
Action  Check the given point geometry. A valid LRS point is a point geometry in Oracle Spatial with an additional dimension for measure.

 

ORA-13333 ORA-13333: invalid LRS measure
Cause  The given measure for linear referencing was out of range.
Action  Redefine the measure.

 

ORA-13334 ORA-13334: LRS segments not connected
Cause  The specified geometric segments are not connected.
Action  Check the start/end points of the given geometric segments.

 

ORA-13335 ORA-13335: LRS measure information not defined
Cause  The measure information of a geometric segment was not assigned (IS NULL).
Action  Assign/define the measure information. An LRS geometric segment is defined if its start and end measure are assigned (non-null).

 

ORA-13336 ORA-13336: failure in converting standard diminfo/geometry to LRS dim/geom
Cause  There is no room for the measure dimension in the given diminfo, or the specified standard geometry is not a point a line string.
Action  Check if the diminfo dimensions are less than 3 or if the geometry type is point or line string.

 

ORA-13337 ORA-13337: failure in concatenating LRS polygons
Cause  LRS concatenation involving LRS polygons is not supported.
Action  Check the geometry and element types to make sure the concatenate operation is not called with a polygon type.

 

ORA-13338 ORA-13338: failure in reversing LRS polygon/collection geometry
Cause  Reversing an LRS polygon/collection geometry produces an invalid geometry.
Action  Check the geometry type to make sure this operation is called on non-polygon geometries.

 

ORA-13339 ORA-13339: LRS polygon clipping across multiple rings
Cause  Clipping (dynseg) a polygon across multiple rings is not allowed.
Action  Polygon clipping is allowed only for a single ring.

 

ORA-13340 ORA-13340: a point geometry has more than one coordinate
Cause  A geometry, specified as being a point, has more than one coordinate in its definition.
Action  A point has only one coordinate. If this geometry is intended to represent a point cluster, line, or polygon, set the appropriate SDO_GTYPE or SDO_ETYPE value. If this is a single point object, remove the extraneous coordinates from its definition.

 

ORA-13341 ORA-13341: a line geometry has fewer than two coordinates
Cause  A geometry, specified as being a line, has fewer than two coordinates in its definition.
Action  A line must consist of at least two distinct coordinates. Correct the geometric definition, or set the appropriate SDO_GTYPE or SDO_ETYPE attribute for this geometry.

 

ORA-13342 ORA-13342: an arc geometry has fewer than three coordinates
Cause  A geometry, specified as being an arc, has fewer than three coordinates in its definition.
Action  An arc must consist of at least three distinct coordinates. Correct the geometric definition, or set the appropriate SDO_GTYPE or SDO_ETYPE attribute for this geometry.

 

ORA-13343 ORA-13343: a polygon geometry has fewer than four coordinates
Cause  A geometry, specified as being a polygon, has fewer than four coordinates in its definition.
Action  A polygon must consist of at least four distinct coordinates. Correct the geometric definition, or set the appropriate SDO_GTYPE or SDO_ETYPE attribute for this geometry.

 

ORA-13344 ORA-13344: an arcpolygon geometry has fewer than five coordinates
Cause  A geometry, specified as being an arcpolygon, has fewer than five coordinates in its definition.
Action  An arcpolygon must consist of at least five coordinates. An arcpolygon consists of an ordered sequence of arcs, each of which must be described using three coordinates. Since arcs are connected the end-point of the first is the start of the second and does not have to be repeated. Correct the geometric definition, or set the appropriate SDO_GTYPE or SDO_ETYPE attribute for this geometry.

 

ORA-13345 ORA-13345: a compound polygon geometry has fewer than five coordinates
Cause  A geometry, specified as being a compound polygon, has fewer than five coordinates in its definition.
Action  A compound polygon must contain at least five coordinates. A compound polygon consists of at least one arc and one line, each of which must be described using three and at least two distinct coordinates respectively. Correct the geometric definition, or set the appropriate SDO_GTYPE or SDO_ETYPE attribute for this geometry.

 

ORA-13346 ORA-13346: the coordinates defining an arc are collinear
Cause  Invalid definition of an arc. An arc is defined using three non-collinear coordinates.
Action  Alter the definition of the arc, or set the SDO_ETYPE or SDO_GTYPE to the line type.

 

ORA-13347 ORA-13347: the coordinates defining an arc are not distinct
Cause  Two or more of the three points defining an arc are the same.
Action  Alter the definition of the arc to ensure that three distinct coordinate values are used.

 

ORA-13348 ORA-13348: polygon boundary is not closed
Cause  The boundary of a polygon does not close.
Action  Alter the coordinate values or the definition of the SDO_GTYPE or SDO_ETYPE attribute of the geometry.

 

ORA-13349 ORA-13349: polygon boundary crosses itself
Cause  The boundary of a polygon intersects itself.
Action  Correct the geometric definition of the object.

 

ORA-13350 ORA-13350: two or more rings of a complex polygon touch
Cause  The inner or outer rings of a complex polygon touch.
Action  All rings of a complex polygon must be disjoint. Correct the geometric definition of the object.

 

ORA-13351 ORA-13351: two or more rings of a complex polygon overlap
Cause  The inner or outer rings of a complex polygon overlap.
Action  All rings of a complex polygon must be disjoint. Correct the geometric definition of the object.

 

ORA-13352 ORA-13352: the coordinates do not describe a circle
Cause  The set of coordinates used to describe a circle are incorrect.
Action  Confirm that the set of coordinates actually represent points on the circumference of a circle.

 

ORA-13353 ORA-13353: ELEM_INFO_ARRAY not grouped in threes
Cause  The ELEM_INFO_ARRAY in an SDO_GEOMETRY definition has more or fewer elements than expected.
Action  Confirm that the number of elements in ELEM_INFO_ARRAY is divisible by 3.

 

ORA-13354 ORA-13354: incorrect offset in ELEM_INFO_ARRAY
Cause  The offset field in ELEM_INFO_ARRAY of an SDO_GEOMETRY definition references an invalid array subscript in SDO_ORDINATE_ARRAY.
Action  Confirm that the offset is a valid array subscript in SDO_ORDINATE_ARRAY.

 

ORA-13355 ORA-13355: SDO_ORDINATE_ARRAY not grouped by number of dimensions specified
Cause  The number of elements in SDO_ORDINATE_ARRAY is not a multiple of the number of dimensions supplied by the user.
Action  Confirm that the number of dimensions is consistent with data representation in SDO_ORDINATE_ARRAY.

 

ORA-13356 ORA-13356: adjacent points in a geometry are redundant
Cause  There are repeated points in the sequence of coordinates.
Action  Remove the redundant point.

 

ORA-13357 ORA-13357: extent type does not contain 2 points
Cause  Extent type should be represented by two points: lower left and upper right.
Action  Confirm that there are only two points for an extent type.

 

ORA-13358 ORA-13358: circle type does not contain 3 points
Cause  Circle type should be represented by three distinct points on the circumference.
Action  Confirm that there are only three points for a circle type.

 

ORA-13359 ORA-13359: extent does not have an area
Cause  The two points representing the extent are identical.
Action  Confirm that the two points describing the extent type are distinct.

 

ORA-13360 ORA-13360: invalid subtype in a compound type
Cause  This subtype is not allowed within the ETYPE specified.
Action  Check the Oracle Spatial documentation for type definitions.

 

ORA-13361 ORA-13361: not enough sub-elements within a compound ETYPE
Cause  The compound type declare more sub-elements than actually defined.
Action  Confirm that the number of sub-elements is consistent with the compound type declaration.

 

ORA-13362 ORA-13362: disjoint sub-element in a compound polygon
Cause  Compound polygon must describe an enclosed area.
Action  Confirm that all sub-elements are connected.

 

ORA-13363 ORA-13363: no valid ETYPE in the geometry
Cause  None of the ETYPEs within the geometry is supported.
Action  Confirm that there is at least one valid ETYPE.

 

ORA-13364 ORA-13364: layer dimensionality does not match geometry dimensions
Cause  The spatial layer has a geometry with a different dimensions than the dimensions specified for the layer.
Action  Make sure that all geometries in a layer have the same dimensions and that they match the dimensions in the SDO_DIM_ARRAY object for the layer in the USER_SDO_GEOM_METADATA view.

 

ORA-13365 ORA-13365: layer SRID does not match geometry SRID
Cause  The spatial layer has a geometry with a different SRID than the SRID specified for the layer.
Action  Make sure that all geometries in a layer have the same SRID and that the SRIDs match the SRID for the layer in the USER_SDO_GEOM_METADATA view.

 

ORA-13366 ORA-13366: invalid combination of interior exterior rings
Cause  In an Oracle Spatial geometry, interior and exterior rings are not used consistently.
Action  Make sure that the interior rings corresponding to an exterior ring follow the exterior ring in the ordinate array.

 

ORA-13367 ORA-13367: wrong orientation for interior/exterior rings
Cause  In an Oracle Spatial geometry, the exterior and/or interior rings are not oriented correctly.
Action  Be sure that the exterior rings are oriented counterclockwise and the interior rings are oriented clockwise.

 

ORA-13368 ORA-13368: simple polygon type has more than one exterior ring
Cause  In a polygon geometry there is more than one exterior ring.
Action  Set the type to be multipolygon if more than one exterior ring is present in the geometry.

 

ORA-13369 ORA-13369: invalid value for etype in the 4-digit forma
t
Cause  A 4-digit etype for a non-polygon type element is used, or the orientation is not a valid orientation for interior/exterior rings of the polygon.
Action  Correct the geometry definition.

 

ORA-13370 ORA-13370: failure in applying 3D LRS functions
Cause  Only non-geodetic 3D line string geometries (made of line segments) are supported for 3D LRS functions.
Action  Check the geometry and element types and the SRID values.

 

ORA-13371 ORA-13371: invalid position of measure dimension
Cause  LRS measure dimension has to be after spatial dimensions. The position has to be either 3rd or 4th in the dim_info_array.
Action  Check the geometry"s gtype and its position in the dim_info_array.

 

ORA-13372 ORA-13372: failure in modifying metadata for a table with spatial index
Cause  Modifying the metadata after the index is created will cause an inconsistency between the geometry"s gtype and diminfo.
Action  Modify (or Prepare) metadata before creating an index on the SDO_GEOMETRY column.

 

ORA-13373 ORA-13373: invalid line segment in geodetic data
Cause  A geodetic line segment was not less than half of a great circle.
Action  Densify the line by adding points.

 

ORA-13374 ORA-13374: SDO_MBR not supported for geodetic data
Cause  The SDO_MBR functionality is not supported for geodetic data.
Action  Find an alternative function that can be used in this context.

 

ORA-13375 ORA-13375: the layer is of type [string] while geometry inserted has type [string]
Cause  The layer has a type that is different or inconsistent with the type of the current geometry.
Action  Change the geometry type to agree with the layer type, or change the layer type to agree with the geometry type.

 

ORA-13376 ORA-13376: invalid type name specified for layer_gtype parameter
Cause  An invalid type name is specified for the layer_gtype constraint.
Action  See the Spatial documentation for of valid keywords that can be used in defining a layer_gtype constraint.

 

ORA-13377 ORA-13377: invalid combination of elements with orientation
Cause  An element of the geometry has orientation specified while some other element has no orientation specified (4-digit etype).
Action  Make sure all the polygon elements have orientation specified using the 4-digit etype notation.

 

ORA-13378 ORA-13378: invalid index for element to be extracted
Cause  An invalid (or out of bounds) index was specified for extracting an element from a geometry.
Action  Make sure the parameters to the extract function are in the valid range for the geometry.

 

ORA-13379 ORA-13379: invalid index for sub-element to be extracted
Cause  An invalid (or out of bounds) index was specified for extracting a sub-element from a geometry.
Action  Make sure the parameters to the extract function are in the valid range for the geometry.

 

ORA-13380 ORA-13380: network not found
Cause  The specified network was not found in the network metadata.
Action  Insert the network information in the USER_SDO_NETWORK_METADATA view.

 

ORA-13381 ORA-13381: table:string not found in network:string
Cause  The specified table was not found in the network metadata.
Action  Insert the table information in the USER_SDO_NETWORK_METADATA view.

 

ORA-13382 ORA-13382: geometry metadata (table:string column:string) not found in spatial network:string
Cause  The specified geometry metadata was not found in the spatial network metadata.
Action  Insert the spatial metadata information in the USER_SDO_NETWORK_METADATA view.

 

ORA-13383 ORA-13383: inconsistent network metadata: string
Cause  There was an inconsistency between the network metadata and the node/link information.
Action  Check the network metadata and the node/link information.

 

ORA-13384 ORA-13384: error in network schema: string
Cause  The network table(s) did not have required column(s)
Action  Check the network schema.

 

ORA-13385 ORA-13385: error in network manager: [string]
Cause  There was an internal error in network manager.
Action  Contact Oracle Customer Support for more help.

 

ORA-13386 ORA-13386: commit/rollback operation error: [string]
Cause  The index-level changes were not fully incorporated as part of the commit or rollback operation.
Action  Correct the specified error and use the following statement: ALTER INDEX PARAMETERS ("index_status=synchronize");

 

ORA-13387 ORA-13387: sdo_batch_size for array inserts should be in the range [number,number]
Cause  The specified value for sdo_batch_size was too high or too low.
Action  Change the value to be in the specified range.

 

ORA-13388 ORA-13388: invalid value for dst_spec parameter
Cause  The dst_spec parameter was specified in the wrong format.
Action  Check the documentation for this parameter.

 

ORA-13389 ORA-13389: unable to compute buffers or intersections in analysis function
Cause  There was an internal error in computing the buffers or intersections in the specified spatial analysis function.
Action  Modify the tolerance value in the USER_SDO_GEOM_METADATA view before invoking the spatial analysis function.

 

ORA-13390 ORA-13390: error in spatial analysis and mining function: [string]
Cause  There was an internal error in the specified analysis function.
Action  Contact Oracle Customer Support for more help.

 

ORA-13401 ORA-13401: duplicate entry for string in USER_SDO_GEOR_SYSDATA view
Cause  The RASTER_DATA_TABLE and RASTER_ID columns contained the same information in two or more rows in the USER_SDO_GEOR_SYSDATA view.
Action  Ensure that the RASTER_DATA_TABLE and RASTER_ID columns in the USER_SDO_GEOR_SYSDATA view contain the correct information, and that the value pair is unique for each row.

 

ORA-13402 ORA-13402: the rasterType is null or not supported
Cause  The specified rasterType was null or not supported.
Action  Check the documentation for the rasterType number and/or formats supported by GeoRaster.

 

ORA-13403 ORA-13403: invalid rasterDataTable specification: string
Cause  Each GeoRaster object must have an associated raster data table whose name is unique among raster data table names in the database. If the GeoRaster object is not empty and not blank, the raster data table must exist, be visible in the current schema, be defined in the same schema as the GeoRaster data table, and be an object table of SDO_RASTER type. However, one or more of these requirements were not met.
Action  Check the rasterDataTable specification and ensure that all relevant raster data table requirements are met.

 

ORA-13404 ORA-13404: invalid ultCoordinate parameter
Cause  The ultCoordinate array parameter had the wrong length or contained an invalid value.
Action  Check the documentation, and make sure the ultCoordinate parameter is correct.

 

ORA-13405 ORA-13405: null or invalid dimensionSize parameter
Cause  The dimensionSize array parameter was null, had the wrong length, or contained an invalid value.
Action  Check the documentation, and make sure the dimensionSize parameter is correct.

 

ORA-13406 ORA-13406: null or invalid GeoRaster object for output
Cause  The GeoRaster object for output was null or invalid.
Action  Make sure the GeoRaster object for output has been initialized properly.

 

ORA-13407 ORA-13407: invalid storage parameter
Cause  The storage parameter contained an invalid specification.
Action  Check the documentation, and make sure the storage parameter is correct.

 

ORA-13408 ORA-13408: invalid blockSize storage parameter
Cause  The blockSize storage parameter had the wrong length or contained invalid value.
Action  Check the documentation, and make sure the blockSize storage parameter is correct.

 

ORA-13409 ORA-13409: null or invalid pyramidLevel parameter
Cause  The specified pyramidLevel parameter was null or invalid.
Action  Make sure the pyramidLevel parameter specifies a valid pyramid level value for the GeoRaster object.

Partager cette page

Repost 0
Published by